Zoeller 95-0001 0.5HP Premium Cast Iron Submersible Sump Pump with Vertical Float Switch
MSRP:
$619.13
$476.25
Features- Corrosion-resistant, powder coated epoxy finish
- Durable, Cast Iron construction
- Cast Iron switch case, motor, pump housing and base
- Viton outer switch boot
- No sheet metal parts to rust or corrode
- All castings are Cast Iron class 25-30 25000# tensile strength
- Stainless steel screws, guard, handle, arm and seal assembly
- Float-operated, submersible, 2-pole mechanical switch integrating advanced switch technology
- Permanent split capacitor motor, oil-filled and hermetically-sealed, automatic reset thermal overload protection
- Bearings-upper and lower oil-Fed Cast Iron
- Carbon and Ceramic shaft seal
- Entire unit pressure-tested after assembly
- Watertight, neoprene square ring between motor and pump housing
- Maximum temperature for effluent or dewatering: 130 degF (54 deg C)
- Passes 1/2" (12 mm) spherical solids
- No screens to clog
- 1-1/2" x 2" PVC Adapter Included with BN and BE Models
Specifications- Motor: 1/2
- Voltage: 115
- Phase: 1 Ph
- Hertz: 60 Hz
- RPM: 3450
- Type: Permanent split capacitor
- Insulation: Class B
- Amps: 10.5
- Operation: Automatic
- Auto On / Off Points: 9-1/2" (24 cm) / 2-1/2" (6.4 cm)
- Discharge Size: 1-1/2" NPT
- Solids Handling: 1/2" (12 mm) spherical solids
- Cord Length: 15' (4.6 m)
- Cord Type: UL listed, 3-wire, grounded plug
- Max Head: 26' (7.9 m)
- Max Flow Rate: 80 GPM (303 LPM)
- Max Operating Temperature: 130° F (54° C)
- Cooling: Oil filled
- Motor Protection: Auto reset thermal overload
- Cap: Cast Iron
- Motor Housing: Cast Iron
- Pump Housing: Cast Iron
- Base: Cast Iron
- Upper Bearing: Sleeve Bearing
- Lower Bearing: Ball Bearing
- Mechanical Seals: Carbon and Ceramic
- Impeller Type: Non-clogging vortex
- Impeller: Engineered thermoplastic
- Hardware: Stainless steel
- Motor Shaft: AISI 1215 cold rolled steel
- Gasket: Neoprene
